
Sustainable

Quality kitchens

Thinking power

Efficient

Dutch manufacture
ACRLYL KIT
For sealing seams in interior spaces with small movement absorption.
Can be painted / filled
Excellent adhesion of commercially available paint / filler to sealants
Wide range of applications
Suitable for indoor joints with little expansion.
Silicone-free
Resistant to aging, weathering and UV
Note
Due to the large number of available paint and varnish formulas, we recommend that you always test beforehand to rule out any interaction. Note: Fully painted joints tend to crack when movement occurs in the joint, as the paint used is typically less elastic than the sealant.
With the 600 ml sausages, 6 sausage tips, item no. 0891601001, included.
Tested according to EN 15651 part 1
Fire behavior: Class E.
Stability under load: ≤ 5%
Volume loss: ≤ 45%
Stretch behavior after immersion in water (from 23 ° C), elongation: ≥ 25%
Durability: Approved
Building material class B2 in accordance with DIN 4102
The usage instructions are recommendations based on the tests we have conducted and our experiences; You should test the product yourself before each application. Due to the large number of applications and storage and processing conditions, we do not accept any liability for results resulting from specific applications. If our free customer service provides technical information or acts as an advisory service, no liability is assumed herewith, except when the advice or information provided falls within the scope of our specified contractually agreed service or when the consultant acted intentionally. We guarantee that our products are always of the highest quality. We reserve the right to make technical changes and further develop products.
Additional information
Color | White |
---|---|
Content | 310 ml |
Container | Cartridge |
Chemical basis | Acrylic resin dispersion |
Density | 1,6 g/cm³ |
Odor | Faint odor |
Continuous movement absorption | 5% |
Min. elongation at break | 250% |
Elongation at break | for foil 2 mm |
Curing speed | 1 mm/d |
Condition curing | 23 ° C and 50% relative humidity |
Min. skin formation time | 10 mins |
Condition of skin formation time | 23 ° C and 50% relative humidity |
Performed with fungicide | No |
Min./max. heat resistance | -20 – 80 °C |
Min./max. processing heat | 5 – 40 °C |
UV resistant | Yes |
Coating tolerance | Yes |
Paintable | Yes |
Pretreatment | On absorbent and porous surfaces |
Mixing ratio | Mixing ratio acrylic sealant with water 1:1 – 01:5 |
Popular appliances
Showing 1–4 of 80 results