Neutrale siliconen, gekleurd
SILICONEN NEUTR. OXIM WIT 310 ML
For medium and heavy floor and wall joints
Adhesion to all surfaces in construction
Does not cause corrosion on metals
Resistant to weathering, aging, UV
Complies with building material class B2 according to DIN 4102
The color display is for information only. Use our color sample cards for an exact color selection.
Neutral silicone sealant is not suitable for bonding or filling voids. Complies with building material class B2 according to DIN 4102. Due to the large number of available lacquer and varnish formulas, especially with alkyd resin lacquers and powder-coated aluminum, you must always carry out your own tests on the relevant part. A risk of yellowing on contact with white alkyd resin varnishes cannot be excluded. When cured, neutral silicone emits an odor typical of silicone. This odor is no longer perceptible once the curing process has been completed.
For materials and substances that come into contact with the sealant after processing, the user must ensure that its composition or vapors do not cause deterioration or alteration (eg discoloration) of the sealant. Use the sample card item no. 5995000402 to determine the exact color
No bag tips are used for the 600 ml bags, item no. 0891601001, included. These must be ordered separately.
Tested according to EN 15651 part 1 INT
Fire behavior: Class E.
Stability under load: <3 mm Volume loss: <20% Adhesion / expansion behavior under pretension after immersion in water: Approved Adhesion / expansion at different temperatures: Approved Adhesion / expansion after exposure to heat, water and artificial light: Approved Elongation behavior: Elongation at break at 23 ° C:> 25%
The usage instructions are recommendations based on the tests we have conducted and our experiences; You should test the product yourself before each application. Due to the large number of applications and storage and processing conditions, we do not accept any liability for results resulting from specific applications. If our free customer service provides technical information or acts as an advisory service, no liability is assumed herewith, except when the advice or information provided falls within the scope of our specified contractually agreed service or when the consultant acted intentionally. We guarantee that our products are always of the highest quality. We reserve the right to make technical changes and further develop products.
Neutral cross-linked silicone, on an oxime basis
|Performed with fungicide||
|Min. skin formation time||
|Continuous movement absorption||
|Min./max. skin formation time||
5-8 min / at 23 ° C and 50% relative humidity
2 mm / d / 23 ° C and 50% relative humidity
|Shelf life from production||
|Min./max. processing heat||
5 – 40 °C
|Min./max. heat resistance||
-40 – 150 °C
|Shore hardness A||
|Min. elongation at break||
|Elongation at break||
for foil 2 mm