STREETFIGHTER STANDARD

Universal filling foam for application with gun
Excellent adhesion to practically all construction surfaces (except PE, PP, PTFE and silicone)

Better sound and heat insulating properties than mineral wool, cork and fiberglass

Form-retaining

No loss of volume and only minimal expansion afterwards once the product has fully cured.

Cures completely quickly

Fine-celled and uniform foam structure

Resistant to aging

Resistant to a wide variety of solvents, paints and chemicals

Note
Adhesive primer must be applied to porous and absorbent surfaces. PURLOGIC® Streetfighter can be applied with the foam guns PURLOGIC® Xpress, article no. 0891 152 4, and with PURLOGIC® COMBIpress, article no. 0891 152 6.

The usage instructions are recommendations based on the tests we have conducted and our experiences; You should test the product yourself before each application. We do not accept any liability for a specific application result due to the large number of applications and storage and processing conditions. If our free customer service provides technical information or acts as an advisory service, no liability is assumed herewith, except when the advice or information provided falls within the scope of our specified contractually agreed service or when the consultant acted intentionally. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop our products.